BELTING INDUSTRIES BIC 600

Fixed Center Drives
( BIC 600 / 650 )
(Semi-Elastic Belt)

DESCRIPTION

The BIC 600 / 650 belt is specifically designed for light to medium duty drives at low to medium speeds where no take up is available.
The belt's elasticity enables it to stretch onto the drive and provide the required tension.
The excellent memory of the belt minimizes tension decay and increases belt life.

SPECIFICATIONS

Tensile	Specific to belt design
Working Tension	Designed for each individual application
Min. Pulley Diameter	1/8 " to 1/4 "
Nominal Thickness	Contact factory
Belt Construction	1 ply polyester cord
Saturant	600 Neoprene 650 Polyurethane
Saturant Properties	Anti-static, excellent oil resistance Excellent abrasion resistance Very good heat resistance
Non-marking Properties	Good
Belt Surfaces	As required by application
Widths Available	To 12"
Lengths Available	4 to 100 inches
Width Tolerance	Under 6 inches plus / minus .030 " Over 6 inches plus / minus .060 "

Each BIC 600/650 is a unique belt, designed for a specific application. To design a belt Belting Industries needs the following information:

Belt width
Belt length
Belt thickness
Number of belts per set, if used in sets
Required tension, horsepower, or driven load rating

Belting Industries belts are constructed with two basic components: woven endless tubular fabric and a saturant. Saturants are neoprene, urethane, EPDM, nitriles, silicone, hypalon or many others. The tubular fabric will determine if the belt will be stable (for adjustable pulleys) or semi-elastic (for fixed pulleys). The above saturants give you the flexibility to select the desired end properties in a finished belt. Each style of belting can have an impression from smooth to heavy, to give it the required co-efficient of friction for your required application.

1-800-THE-BELT (1-800-843-2358)