WOVEN ENDLESS BELTS

 Adjustable Center Drives
(BIC 2800)
(Stable, Non-Stretch) The Grizzly TM

DESCRIPTION

SPECIFICATIONS

Tensile

 3000 lbs per inch of width in endless form

Working Tension

 40 to 200 lbs per inch of width

Min. Pulley Diameter

 5/8 "

Nominal Thickness

 .037 "

Belt Construction

 1 ply polyester cord or Kevlar

Saturant

 Neoprene

 Saturant Properties
  • Anti-static; excellent oil resistance
  • Very good abrasion resistance
  • Very good heat resistance

Belt Surface

Smooth by heavy texture

 Normal Installation
  • Smooth surface to pulley
  • Rough side to pulley where oil or other contamination is present

Widths Available

 To 12 inches; over 12 inches
contact the factory

Lengths Available

 8 to 132 inches

 Width Tolerance
  • Under 6 inches
    plus / minus .030 "
  • Over 6 inches
    plus / minus .060 "

Length Tolerance

 plus / minus 0.5%

Special Requirements

 Contact factory
Belting Industries belts are constructed with two basic components: woven endless tubular fabric and a saturant. Saturants are neoprene, urethane, EPDM, nitriles, silicone, hypalon or many others. The tubular fabric will determine if the belt will be stable (for adjustable pulleys) or semi-elastic (for fixed pulleys). The above saturants give you the flexibility to select the desired end properties in a finished belt. Each style of belting can have an impression from smooth to heavy, to give it the required co-efficient of friction for your required application.

1-800-THE-BELT (1-800-843-2358)